Product Application: 

In tower cranes, wind turbines, high-pole lights, metallurgy, iron towers (electricity, communications, microwave, etc.), chimneys (thermal power plants, coking plants, chemical plants, etc.), high-rise buildings, large Bridges, large port machinery, large engineering machinery, wind turbines and other occasions that need to play a warning role on aircraft. 

Main functions and features: 

● Light source for LED, using imported international advanced long life, low power consumption, high efficiency chip package. 

● The use of low illumination, high efficiency solar panels, with special solar battery for power supply. 

● The control circuit adopts the special controller for flashlight with micro power consumption, which reduces the energy consumption of the control circuit and greatly improves the reliability of the product. 

● Battery use advanced power management system, in the battery undervoltage, overvoltage, floating charge and other aspects of comprehensive protection, effectively improve the service life of the battery. 

● Using conventional lithium iron phosphate battery, easy to replace. 

● PC material, with anti-bird device, has a particularly good impact strength, thermal stability, gloss.  

● The shell adopts aviation aluminum alloy material, with light weight, corrosion resistance and other advantages. 

● Photoelectric automatic control function.  

● Lamps and lanterns work continuously for more than 10 days in rainy days (can be customized). 

● Flicker type or steady on type can be switched. 

● Optional accessories: mounting bracket. 

● Sealing material: waterproof sealing ring. 

● Flame retardant level: UL94-V0. 

Product Parameters: 

ICAO-type A low light intensity obstacle lamp standard, and FAA L-810 standard 

The power supply voltage: DC3.7 V / 6 ah lithium battery 

Working mode: Constant light 10CD/flashing ≥ 32.5CD (special frequency can be customized) 

The effective intensity : 10 CDS/acuity 32.5 CD 

The average power consumption: 2.5W 

The light source type : LED 

Emitting light colors : red/ yellow/ blue/ white 

Horizontal luminous Angle :360 ° 

Vertical luminous Angle :10 ° or higher 

Light life :100000 hours or more 

Overall dimensions :φ 162 × 160 (mm)  

Installation dimensions :Section circle φ 140 uniform cloth 4 holes M6 (mm) 

Light control ambient brightness :50Lux 

Solar panel parameters :3W6V  

Continuous cloudy and rainy working days > 7 days 

Protection grade :IP68 

The environment temperature :-40C ~ 85C 

Working humidity :0% ~ 95% 

The product weight :1kg 

The wind resistance :80 m/s 

The material Main body: Aluminum alloy  

Chimney: PC 

Installation dimension drawing: 

Installation and use method: 

● Lamps must be installed in a place where sunlight can be fully received to ensure that it can work continuously. 

● Install the lamp on the horizontal mounting surface, the mounting surface should be flat and have sufficient mechanical strength, fixed with 4 M10 screws. 

● When in use, turn on the battery switch at the bottom of the lamp, and turn it off for long-term storage. 

● Set the required working mode, bottom wave switch, constant light/flash. 

● The lamp has light control function, when the ambient illumination is lower than the light control switch value when the lamp starts to work. 

● Because the lamp with photoelectric switch function, when the environmental light is high, the aviation light will not be lit.  During the test, the aerial lamp should be placed in a dark environment. 

Matters needing attention 

● Internal storage battery, please replace the battery regularly to ensure that the lamp can work normally, it is recommended to replace once a year. 

● When stored for more than 6 months, the product should be exposed to sunlight for 3 days to fully charge the battery. 

● The top bird tip is sharp, beware of being pricked.